Gear guide
Best Wood Carving Vises: Faceplate Carving Vises, Patternmaker's and Ball Joint
Updated Picked from Amazon listings, not hands-on tests. How we pick

Once you move from a knife to gouges, the work has to be held so both hands can stay on the tool and behind the edge. A wood carving vise does that and lets you turn the piece to a new angle without unclamping it. There are three main types. A faceplate carving vise screws to the base of the carving through a round plate and swivels and tilts on an arm: the work is fully exposed on every side except the bottom, which suits figures, busts and in-the-round carving. A patternmaker's vise has jaws that rotate and tilt, so it holds odd shapes, boards and relief panels. Small ball joint swivel vises clamp to a table edge and suit small figures and detail work. Check weight and mounting: a heavy cast vise needs a solid bench, and clamp-on models are limited by bench thickness. This guide compares seven vises by stated size, construction and mounting. Everything comes from the listings; nothing here was tested.
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Top picks at a glance
Compare all picksClosest match for the job
Woodriver Carving Vise
5 inch platen, about 3/8 inch thick, gives a wide base for screwing on a carving blank.
See price on AmazonSee it on AmazonMost for the money on paper
BMTURNING Carving Vise with 5 in Faceplate
5 inch base plate with plenty of area for mounting a workpiece, per the listing.
See price on AmazonSee it on AmazonMost complete listing
Woodriver Patternmaker's Carving Vise
Holds work in jaws, so it needs no screw holes in the carving.
See price on AmazonSee it on Amazon
Compare the picks
- Woodriver Carving Vise
- BMTURNING Carving Vise with 5 in Faceplate
- Woodriver Patternmaker's Carving Vise
- Stanley 83-069M Maxsteel Multi-Angle Base Vise
- Excel Ball Joint Swivel Vise
Facts are taken from each Amazon listing. Prices are checked daily and shown with their date.
The picks in detail
Pick 1 · WOODRIVER
Woodriver Carving Vise
See price on AmazonWoodRiver carving vise in cast iron and steel, about 13 lb 10 oz, with a 5 inch faceplate and a base that rotates 360 degrees and locks with a ring. Holds figures and busts screwed to the plate.
What the listing offers
- 5 inch platen, about 3/8 inch thick, gives a wide base for screwing on a carving blank.
- Base rotates 360 degrees and locks with a lock ring, so the work turns without unclamping.
- Cast iron and steel construction at over 13 lb, made for the force of gouge and mallet work.
Limits to know
- Bolts or screws to the bench, so it needs a solid, permanent spot.
- Holds only work that can take screws in its base, not panels held edge-on.
Pick 2 · BMTURNING
BMTURNING Carving Vise with 5 in Faceplate
See price on AmazonBMTURNING carving vise with a 5 inch faceplate, cast iron and steel, 14 lb, and a single-lever action for changing position. A lower-priced alternative to the WoodRiver faceplate vise.
What the listing offers
- 5 inch base plate with plenty of area for mounting a workpiece, per the listing.
- Single lever action for fast position changes while carving.
- 14 lb cast iron and steel build, and a pin wrench for the pivoting base is included.
Limits to know
- Mounting screws are not included, as the spec sheet notes.
- Lesser-known brand than WoodRiver, and the manufacturer gives no tilt range.
Pick 3 · WOODRIVER
Woodriver Patternmaker's Carving Vise
See price on AmazonWoodRiver patternmaker's carving vise with 4-7/8 inch jaws and a body that swivels 360 degrees. Clamps irregular shapes, legs and panels at almost any angle.
What the listing offers
- Holds work in jaws, so it needs no screw holes in the carving.
- 4-7/8 inch jaws and a 360 degree swivel body, stated for holding virtually any shape.
- Listed for table legs, a good sign for long pieces and relief panels on edge.
Limits to know
- The most expensive vise in this guide by a wide margin.
- The listing gives no weight, jaw opening or mounting details.
Pick 4 · STANLEY
Stanley 83-069M Maxsteel Multi-Angle Base Vise
See price on AmazonStanley Maxsteel multi-angle base vise with a swivel-ball head that locks in any position and an integral screw clamp. A small bench-top vise for small carvings and detail.
What the listing offers
- Swivel-ball design gives infinite, lockable positioning, per the listing.
- Integral screw clamp attaches to most work surfaces without bolts.
- Low price from a major tool brand, a cheap way to try holding small work.
Limits to know
- Listed for crafts, models and electronics: too small for gouge and mallet work.
- The product page gives no jaw width or opening.
Pick 5 · Excel Blades
Excel Ball Joint Swivel Vise
See price on AmazonExcel ball joint swivel vise with rubber jaws, a bench clamp, 360 degree swivel and 90 degree tilt. A small hobby vise for whittled figures and detail work.
What the listing offers
- Rubber jaws protect a finished or painted carving from marks.
- Swivels 360 degrees and tilts 90 degrees to bring each face of a small piece toward you.
- Clamps to the bench, so it sets up and comes off in seconds.
Limits to know
- The listing leaves the jaw opening and clamp size blank, so capacity is unclear.
- A light hobby vise: it will not hold up to mallet work.
More gear for the basic cuts and safety stage
Carving Bench chooses every product independently from what its Amazon listing states. We may earn a commission from the links above. As an Amazon Associate I earn from qualifying purchases.