Notes
Every note in the handbook
How-tos, fixes, comparisons and charts, newest first.
- How to Start Wood Carving: A First-Month Plan for BeginnersTo start wood carving, buy one good knife, a strop, a thumb guard and basswood, learn three safe cuts and finish small projects. A first-month plan and budget.
- Wood Carving Ornaments: Easy Designs, Wood Sizes and FinishingHow to carve wood Christmas ornaments: eight designs from whittled trees and Santas to chip carved stars, with wood sizes, tools, hangers, paint and timing.
- Wood Carving Ideas for Beginners: First Projects in Every Carving StyleBeginner wood carving ideas grouped by style: knife, chip, relief, spoon, in the round and power carving, with the wood, tools and time each first project needs.
- Wood Carving Relief Patterns: Designs by Difficulty and How to Use ThemRelief carving patterns ranked from a single leaf to a landscape, with board sizes, carving depth, how to transfer a pattern and the gouges each design needs.
- How to Wood Carve Faces: Proportions, Cut Order and Common MistakesTo carve a face in wood, lay out the face in thirds on a corner of a basswood block, set the brow and nose first, then shape the mouth and finish with the eyes.
- Wood Carving With an Angle Grinder: Discs, Technique and SafetyWood carving with an angle grinder means fitting a carving disc, clamping the work and shaping with two hands and the guard on. Discs, grits, steps and safety.
- How to Wood Carve With a Dremel: Bits, Speeds and a First ProjectTo carve wood with a Dremel, clamp the work, rough out with a coarse carbide burr at medium speed, then refine and detail with smaller bits. Steps and settings.
- Best Wood for Whittling: Which Woods Cut Easily and Which to SkipBasswood is the best wood for whittling at 410 lbf Janka. See the runners-up, green branch options, woods to avoid and how to pick a good block.
- Best Wood for Spoon Carving: A Species-by-Species ChartSpoon carving wood chart: 15 species with Janka hardness, grain, how each carves green and what it suits, including the woods sources say to skip.Chart
- Best Wood for Chip Carving: Species, Board Thickness and BlanksChip carving wood chart: 10 species by Janka hardness, how cleanly each one chips and whether beginners should use it, plus board thickness of 1/4 to 1/2 inch.Chart
- Wood Carving Gouge Sizes Chart: Sweep Numbers, Widths and What Each CutsGouge sweep numbers 1 to 11 and V-tools in the Sheffield list and the Swiss (Pfeil) numbering, widths in mm and inches, and what each tool cuts.Chart
- Why Is Whittling So Hard? Six Causes and How to Fix EachWhittling feels hard when the edge is dull, the wood is over about 600 lbf or the cut runs against the grain. Six causes, the sign of each and the fix.Fix
- Whittling With a Pocket Knife: Which Knives Work and Which Do NotWhich pocket knives can whittle: Swiss Army knife, Opinel No.6 to No.8, slipjoint and tactical folder compared by lock, blade and edge, plus 3 first cuts.Explainer
- Whittling vs Wood Carving: What Is the DifferenceWhittling is wood carving with a knife only. A table compares whittling, chip carving, relief carving and carving in the round by tools, wood and workspace.Comparison
- Whittling Projects for Beginners, Sorted by Time and Skill12 whittling projects for beginners in the order to try them, with block size, the time a source publishes for each and what each project teaches.Chart
- Should You Soak Wood Before Carving? What Softens Dry WoodSoaking a whole block is not standard: it can split as it dries. A light mist of half rubbing alcohol, half water is the usual fix. Methods compared.Fix
- How to Use a Hook Knife: Grips and Grain Direction for a Spoon BowlHow to use a hook knife: 3 grips as makers and guides describe them, cutting across the grain and downhill, bowl depth of 7 to 8 mm, and why it tears.How-to
- How to Strop a Carving Knife and How Often to Do ItHow to strop a wood carving knife: bevel flat, edge trailing, light pressure, published stroke counts from 5 to 30, and how often carvers strop.How-to
- How to Sharpen Wood Carving Tools: Gouges, V-Tools and Chipped EdgesHow to sharpen wood carving gouges, V-tools and chisels: bevel angles of 15 to 25 degrees, rolling the gouge, slip stones and grinding out a chip.How-to
- How to Sharpen a Whittling Knife: Flat Bevel on a Stone, Then a StropSharpen a whittling knife with the whole bevel flat on the stone: 400 to 600 grit for damage, 800 to 1,000 to refine, then 20 to 30 strop strokes per side.How-to
- How to Sharpen a Spoon Carving Hook Knife Step by StepSharpen a spoon carving hook knife with 400 to 1,500 grit wet-dry paper on a block and a dowel, then strop. Steps, grits and how to tell it is sharp.How-to
- How to Fix Cracks in a Wood Carving and Stop New OnesMatch the crack to the fix: glue and clamp, glue with sawdust, a wood sliver or epoxy. Clamp 30 to 60 minutes, wait 24 hours, then slow the drying.Fix
- How to Finish a Wood Carving: Oil, Wax, Sealer or PaintOil, wax, clear sealer and thinned acrylic paint compared for a basswood carving, with published drying times and the seal, paint and wax steps.How-to
- How to Dry Wood for Carving and How Long It TakesRule of thumb: one year per inch of thickness for hardwood, 2 to 3 days for a thin carved spoon. Steps to seal, stack and check wood so it dries without cracks.How-to
- How to Chip Carve: Knife Grip, the Three-Cut Triangle and First BordersHow to chip carve: the two knife grips, a blade angle of 45 to 65 degrees, the three-cut triangle in order on a 4 mm grid, and why chips do not pop out.How-to
- How to Carve a Spoon: Steps, Tools and How Long It TakesHow to carve a wooden spoon in 10 steps with 3 tools: axe, straight knife, hook knife. A first spoon takes 2 to 4 hours plus 2 to 3 days of drying.How-to
- Green Wood vs Dry Wood for Spoon Carving: Which to UseGreen wood cuts far more easily and is the usual choice for spoons. Compare green and dry wood on effort, cracking and the 2 to 3 day drying time.Comparison
- Food-Safe Finish for Carved Spoons: Which Oil or Wax to UseSpoon finishing oils compared: mineral oil, beeswax blend, pure tung, linseed and walnut oil, with cure times from 24 hours to 30 days as the makers state them.Comparison
- Chip Carving Practice Patterns: Six Beginner Sheets and Free Pattern SourcesSix beginner chip carving practice sheets on a 4 mm or 1/4 inch grid, how to draw and transfer each one, and named sources of free printable PDF patterns.Chart
- Can You Whittle Pine? White Pine, Yellow Pine and Store LumberEastern white pine and sugar pine (380 lbf) whittle well. Southern yellow pine (690 lbf) and most store lumber do not. A table of pine types and what to carve.Explainer