Comparison

Food-Safe Finish for Carved Spoons: Which Oil or Wax to Use

Published Updated

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Gear for this job

All 6 picks compared

You carved a spoon and want to eat with it. This page compares the usual finishes by what their makers and the US food regulations say, with the source named each time. Carving Bench does not test finishes and gives no food-safety assurance of its own. A maker's statement applies only to that maker's product, used as its label directs. Two things decide the choice: whether you want a finish that hardens, and whether anyone who will use the spoon has a nut allergy.

Spoon carving oil options compared

Read each row as a report of what a named source says, not as this site's recommendation. Where no maker statement was found, the row says so.

Spoon carving finishing: oil that hardens or oil that does not

Mineral oil is a non-drying oil. It soaks in and never hardens, so washing and use slowly take it out and it has to be reapplied. A beeswax blend adds wax to the same oil. Tung, linseed and walnut oil are drying oils: they react with air and harden inside the wood.

The standard statement about drying oils is that one is treated as suitable for food contact once it has fully cured. That makes the cure time on the label the number that matters. Real Milk Paint, for example, tells users of its pure tung oil to allow the full cure of 15 to 30 days on food-contact surfaces. The wood counts too: closed-grain hardwoods are the usual choice, as the spoon wood chart shows.

What the FDA regulations say, and what they do not

Four US regulations are relevant. 21 CFR 172.878 says white mineral oil may be safely used in food under the conditions it lists, and 21 CFR 178.3620 allows mineral oil as a component of nonfood articles intended for contact with food. 21 CFR 184.1973 affirms beeswax as generally recognized as safe as a food ingredient. 21 CFR 175.300, on resinous and polymeric coatings for food-contact surfaces, lists tung (chinawood), linseed and walnut among the drying oils such coatings may be made from, under its conditions.

None of these approves a hobby finish or a finished spoon. The FDA's inventory page for tung oil tells readers to consult the regulation to see whether a substance is authorized for the intended use. A label statement is the maker's and covers that product only.

Note.Boiled linseed oil from the hardware store is not raw linseed oil. The Craftsman Blog describes it as chemically modified with metallic drying agents. No source opened for this page names it for utensils.

Choose mineral oil or a beeswax blend when

This is the non-curing route: nothing to wait for and nothing that hardens. The cost is upkeep, since washing and use take the oil out of the wood.

  • You do not want to wait for a cure. Howard's directions for wooden bowls and utensils are a soak of at least 20 minutes, then a wipe.
  • Someone who will use the spoon has a nut allergy. Howard states that its cutting board oil has had no contact with nuts, gluten or other allergens.
  • You accept re-oiling. Howard's rule for its conditioner is to reapply whenever the wood looks or feels dry.
  • You want some water resistance. Arbutus Arts, a utensil maker, describes beeswax mixed into the oil as a tougher finish that resists water better but is not waterproof.

Choose a drying oil (tung, linseed or walnut) when

This is the curing route: the oil hardens in the wood, and the spoon waits until the cure time its maker gives has passed.

  • You want a finish that hardens in the wood instead of one that is topped up as it washes out.
  • You can wait for pure tung oil. Real Milk Paint gives 2 to 4 coats about 40 minutes apart, 7 to 10 days before light use and 15 to 30 days for a full cure.
  • You want a shorter wait. Mahoney's directions for its walnut oil are a 1 hour soak, a wipe and 24 hours in a room above 70 degrees. Tried & True gives a minimum cure of 8 hours for its Danish Oil.
  • Nobody who will use the spoon has a nut allergy, if the oil is walnut.

Walnut oil, tung oil and nut allergies

Walnut oil comes from a tree nut. FARE, the food allergy organization, lists walnut among the tree nuts and notes that tree nut oils such as walnut are often not highly refined. Arbutus Arts, which finishes its own utensils with walnut oil, warns that a nut oil may affect people with nut allergies even when it is used as a finish.

Makers of nut-derived oils describe their own products in different ways, and none of that is medical advice. This site repeats no maker's reassurance about allergies. If anyone who will use the spoon has a nut allergy, choose a finish that is not made from nuts, such as mineral oil with beeswax, or ask an allergist first.

If the spoon is a gift, is for sale, or is for someone with a nut allergy, say what it was finished with and leave the decision to that person and their allergist.

How to oil a carved spoon

The product label comes first. These are the makers' own directions put in order, for a spoon made as in how to carve a spoon. Carvings that are only looked at have more options: see how to finish a wood carving.

  1. 1

    Let the spoon dry first. A thin spoon carved from green wood dries in about 2 to 3 days, and sources range up to two weeks.

  2. 2

    Apply the finish as its label directs. Mineral oil: soak at least 20 minutes. Walnut oil: a heavy coat left for 1 hour. Pure tung oil: 2 to 4 coats about 40 minutes apart.

  3. 3

    Wipe away all the excess. Every maker's directions quoted here include this step.

  4. 4

    Wait out the cure of a drying oil: 24 hours above 70 F for Mahoney's walnut oil, 15 to 30 days for pure tung oil on food-contact surfaces.

  5. 5

    Lay oily rags flat to dry before throwing them out. Rags wet with drying oils can self-heat.

  6. 6

    Wash the spoon by hand, dry it at once and keep it out of the dishwasher, as Anne of All Trades advises. Re-oil when the wood looks dry.

Finishes compared side by side

If you want to see specific bottles, the finish guide lines up mineral oil, wood butter, pure tung oil, a tung and walnut blend and a bowl topcoat by type, size and the food-contact wording each maker states. Non-curing oils are the easiest start for a spoon you will re-oil, while curing finishes such as tung oil need thin coats and a full cure before the spoon touches food. Whatever you pick, follow the cure time on the label and check the maker's food-contact statement yourself.

Compare food-safe wood finishes →

Quick answers

Short answers to the searches behind this page. Each reports a named source. None is a food-safety assurance from Carving Bench.

  • Which spoon carving oil has the shortest wait? Mineral oil has no cure: Howard gives a 20 minute soak. Of the drying oils, Mahoney's walnut oil stands 24 hours and pure tung oil needs 15 to 30 days.
  • Is walnut oil a problem for nut allergies? This site cannot say. Walnut is a tree nut, and one utensil maker warns that a nut oil may affect allergic people even as a finish. Ask an allergist, or use a finish that is not made from nuts.
  • Can any wood carving finishing oil go on a spoon? Not every one is sold for that. Use a product whose maker names utensils or food contact. Boiled linseed oil contains metallic drying agents.
  • Can I use cooking oil? Anne of All Trades uses walnut oil or another cooking oil that will not go rancid, and advises against olive oil.

What you need for this

Sources