Gear guide
Best Chip Carving Knives: Cutting Knife, Stab Knife and Starter Sets
Picked from Amazon listings, not hands-on tests. How we pick

Chip carving uses two knives, and most beginners need only one of them. The cutting knife does nearly all the work: held at about 65 degrees to the board, it makes the three cuts that meet at one point and free a triangular chip. The stab knife removes no wood: it is pressed into the surface to leave wedge-shaped accent marks. So a single cutting knife covers the standard three-cut triangle, and a stab knife or a chip carving knife set is an add-on for later. What differs between listings is the blade length, how the blade is shaped and set to the handle, the steel, and whether the knife is stated to arrive sharpened. That last point matters because a dull edge is one of the standard reasons chips will not pop out. This guide compares six chip carving knives and small sets on those four points, using only what each Amazon listing states. Nothing here was tested. Practice on basswood, the standard first wood for chip carving.
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Top picks at a glance
Compare all picksClosest match for the job
Flexcut KN15 chip carving knife, 1 in blade
The listing states the blade is set at a slight downward angle specifically for chip carving.
See price on AmazonSee it on AmazonMost for the money on paper
BeaverCraft C6 chip carving knife, 1 in
The blade is high carbon steel, hardened and sharpened, and the listing says it is sharp right out of the box.
See price on AmazonSee it on AmazonMost complete listing
Flexcut KN115 chip carving set, 3 knives
The listing names three knives selected for chip carving: a mini-chip carving knife, a chip carving knife and a skew knife.
See price on AmazonSee it on Amazon
Compare the picks
- Flexcut KN15 chip carving knife, 1 in blade
- Blade length
- 1 in
- Blade shape
- Angled slightly downward
- Steel
- 1095 high carbon steel
- Sharpened
- Yes, ready to use
- Flexcut KN115 chip carving set, 3 knives
- Blade length
- not stated
- Blade shape
- Chip, mini-chip, skew
- Steel
- 1095 high carbon steel
- Sharpened
- Yes, ready to use
- BeaverCraft C6 chip carving knife, 1 in
- Blade length
- 1 in
- Blade shape
- not stated
- Steel
- High carbon steel
- Sharpened
- Yes, sharp out of the box
- pfeil Swiss made chip carving knife
- Blade length
- not stated
- Blade shape
- not stated
- Steel
- Alloy steel, Rockwell 57-60
- Sharpened
- Yes, pre-sharpened
- Acorn by Henry Taylor curved chip knife, 1-1/4 in
- Blade length
- 1-1/4 in
- Blade shape
- Curved
- Steel
- Sheffield steel
- Sharpened
- not stated
- UJ Ramelson Chip Carving Knife Set, 3 Piece
- Blade length
- not stated
- Blade shape
- 1 stab knife, 2 chip knives
- Steel
- Steel, grade not stated
- Sharpened
- Ground-honed edges
| Pick | Blade length | Blade shape | Steel | Sharpened | Price | Link |
|---|---|---|---|---|---|---|
| Flexcut KN15 chip carving knife, 1 in blade | 1 in | Angled slightly downward | 1095 high carbon steel | Yes, ready to use | - | Amazon |
| Flexcut KN115 chip carving set, 3 knives | not stated | Chip, mini-chip, skew | 1095 high carbon steel | Yes, ready to use | - | Amazon |
| BeaverCraft C6 chip carving knife, 1 in | 1 in | not stated | High carbon steel | Yes, sharp out of the box | - | Amazon |
| pfeil Swiss made chip carving knife | not stated | not stated | Alloy steel, Rockwell 57-60 | Yes, pre-sharpened | - | Amazon |
| Acorn by Henry Taylor curved chip knife, 1-1/4 in | 1-1/4 in | Curved | Sheffield steel | not stated | - | Amazon |
| UJ Ramelson Chip Carving Knife Set, 3 Piece | not stated | 1 stab knife, 2 chip knives | Steel, grade not stated | Ground-honed edges | - | Amazon |
Facts are taken from each Amazon listing. Prices are checked daily and shown with their date.
The picks in detail
Pick 1 · FLEXCUT
Flexcut KN15 chip carving knife, 1 in blade
See price on AmazonA single cutting knife with a 1 inch blade in 1095 high carbon steel, set at a slight downward angle for chip carving, on an ash handle. The one-knife answer for the standard three-cut triangle.
What the listing offers
- The listing states the blade is set at a slight downward angle specifically for chip carving.
- Blade length and steel are both stated: a 1 inch blade in 1095 high carbon steel.
- It is described as ready to use right out of the package, with an ash hardwood handle, and made in the USA.
Limits to know
- One knife only: no stab knife, polishing compound or strop is included in this listing.
- The spec sheet gives no blade thickness and no hardness figure.
Pick 2 · FLEXCUT
Flexcut KN115 chip carving set, 3 knives
See price on AmazonA chip carving knife set of three: a chip carving knife, a mini-chip carving knife and a skew knife in 1095 high carbon steel, with a bar of polishing compound. For a buyer who wants two blade sizes at once.
What the listing offers
- The listing names three knives selected for chip carving: a mini-chip carving knife, a chip carving knife and a skew knife.
- A bar of Flexcut Gold polishing compound is included for stropping.
- The blades are 1095 high carbon steel, described as ready to use right out of the package, and made in the USA.
Limits to know
- There is no stab knife in the set: the third knife is a skew knife.
- This listing does not state the blade lengths, and no strop is included to use the compound on.
Pick 3 · BeaverCraft
BeaverCraft C6 chip carving knife, 1 in
See price on AmazonA single chip carving knife with a 1 inch blade per the title, high carbon steel and an ash handle finished with linseed oil, listed as sharp out of the box. A simple first cutting knife for geometric work.
What the listing offers
- The blade is high carbon steel, hardened and sharpened, and the listing says it is sharp right out of the box.
- The handle is ash finished with natural linseed oil, and the title gives a 1 inch blade.
- The spec sheet describes it for geometric carving and small detail cuts, and states it is made in Ukraine.
Limits to know
- The listing calls the blade shape special for geometric carving but does not describe its angle to the handle.
- Steel grade and hardness are not stated, and no compound or strop is included.
Pick 4 · pfeil
pfeil Swiss made chip carving knife
See price on AmazonA Swiss made chip carving knife in special alloy steel with a stated Rockwell hardness of 57-60 and a hardwood handle, pre-sharpened for immediate use. For a buyer who puts a stated hardness first.
What the listing offers
- The listing states it is pre-sharpened for immediate use.
- Hardness is stated: special alloy steel at Rockwell 57-60, the only hardness figure in this guide.
- It is stated to be Swiss made, with a hardwood handle.
Limits to know
- The spec sheet is very short: no blade length, no blade shape and no handle wood species are given.
- One knife only: no stab knife or polishing compound is included.
Pick 5 · Acorn Brand
Acorn by Henry Taylor curved chip knife, 1-1/4 in
See price on AmazonA curved chip knife hand-forged in Sheffield, with a 1-1/4 inch blade and an octagonal beech handle. The listing describes it for whittling, stop cuts and fine details, so it is a second knife more than a first one.
What the listing offers
- Dimensions are fully stated: 1-1/4 inch blade, .0475 inch blade thickness, 5-3/4 inch overall length.
- The blade is Sheffield steel, hand-forged and heat-treated by Henry Taylor Ltd. in Sheffield, UK.
- The handle is octagonal European beech with a brass ferrule.
Limits to know
- The manufacturer does not say the knife arrives sharpened, so expect to hone and strop it before the first cut.
- The blade is curved, not the straight cutting-knife shape, and the product page notes minor handmade variations in size.
Pick 6 · UJ Ramelson Co
UJ Ramelson Chip Carving Knife Set, 3 Piece
See price on AmazonA three-piece chip carving set with one stab knife and two chip knives on hardwood handles, with ground-honed edges. The only pick here that includes a stab knife for accent marks.
What the listing offers
- The set includes a stab knife and two chip knives, so both chip carving knife types are in one purchase.
- The handles are hardwood, shaped to fit the hand according to the listing.
- The edges are described as ground-honed.
Limits to know
- The product page has three short bullets: no blade lengths, no steel grade and no hardness are given.
- It does not say how the two chip knives differ, and no polishing compound or strop is included.
Read before you buy
- Wood Carving Ornaments: Easy Designs, Wood Sizes and FinishingHow to carve wood Christmas ornaments: eight designs from whittled trees and Santas to chip carved stars, with wood sizes, tools, hangers, paint and timing.
- Wood Carving Ideas for Beginners: First Projects in Every Carving StyleBeginner wood carving ideas grouped by style: knife, chip, relief, spoon, in the round and power carving, with the wood, tools and time each first project needs.
- Best Wood for Chip Carving: Species, Board Thickness and BlanksChip carving wood chart: 10 species by Janka hardness, how cleanly each one chips and whether beginners should use it, plus board thickness of 1/4 to 1/2 inch.
- Whittling vs Wood Carving: What Is the DifferenceWhittling is wood carving with a knife only. A table compares whittling, chip carving, relief carving and carving in the round by tools, wood and workspace.
- How to Sharpen a Whittling Knife: Flat Bevel on a Stone, Then a StropSharpen a whittling knife with the whole bevel flat on the stone: 400 to 600 grit for damage, 800 to 1,000 to refine, then 20 to 30 strop strokes per side.
Carving Bench chooses every product independently from what its Amazon listing states. We may earn a commission from the links above. As an Amazon Associate I earn from qualifying purchases.