Chart
Best Wood for Chip Carving: Species, Board Thickness and Blanks
Published
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Short answer
Basswood is the best wood for chip carving: 410 lbf on the Janka scale, with a straight grain and a fine, even texture that takes crisp chips. Butternut (490 lbf) and European lime (700 lbf) are the other two standard choices. Practice boards are most often 3/8 inch thick, and published sizes run from 1/4 inch to about 1/2 inch.
Gear for this job
All 7 picks comparedBeaverCraft BW19 Basswood Carving Blocks
See price on AmazonSee it on AmazonJyongmer Basswood Carving Blocks, 30 Pcs
See price on AmazonSee it on AmazonMANCHAP basswood blocks 6 x 2 x 2 in, 10 pack
See price on AmazonSee it on Amazon

Chip carving is done on a flat, dry board with a knife pushed by hand, so two things decide whether a wood works: how hard the push is and how evenly the grain lets go of the chip. The chart takes its hardness figures from the Wood Database and its yes, maybe and no from the rule printed under this site's wood chart. Those verdicts are the usual hobby consensus applied to hardness and grain. They are not test results, and a sharp knife matters as much as the species.
Chip carving wood types: the chart
Read across for the wood you have, or down for one to buy. Janka hardness is the force in pounds-force needed to press a 0.444 inch steel ball halfway into dry wood: the lower the number, the easier the knife goes in. The full table of 36 species, sortable and filtered by carving style, is the wood for carving chart.
| Wood | Janka, lbf | Chips cleanly? | The push | For beginners? |
|---|---|---|---|---|
| Basswood | 410 | Yes. Straight grain, fine even texture | Light | Yes. The standard first board |
| Butternut | 490 | Yes. Visible grain, can fuzz under a dull edge | Light | Yes. The usual second choice |
| European lime | 700 | Yes. The classic European carving wood | Moderate | Yes, with a sharp knife |
| Eastern white pine | 380 | Maybe. Soft and even for a pine, clear boards only | Light | Practice only, no knots or resin |
| Yellow poplar | 540 | Maybe. Easy to work, a step harder than basswood | Light | After basswood |
| Soft maple (silver, red) | 700 to 950 | Maybe. Fine closed grain | Moderate to hard | Not as a first board |
| Black cherry | 950 | Maybe. Even grain, works well | Hard | Not as a first board |
| Black walnut | 1,010 | Maybe. Crisp cuts and a dark color | Hard when dry | Later, with small chips |
| Northern red oak | 1,220 to 1,290 | No. Hard, with large open pores | Very hard | No |
| Hard maple | 1,450 | No. Above the 1,050 lbf limit of the rule | Very hard | No |
What is the best wood for chip carving?
Basswood. At 410 lbf it is the softest common carving wood that still holds detail, and the Wood Database describes its grain as straight with a fine, even texture and rates it among the most suitable species for hand carving. Even texture is what chip carving needs: the three walls of a chip cross the grain at different angles, and a wood with hard and soft bands turns the edge aside.
When you pick a board, look at it before the label. Lora Irish's supply list asks for even, straight grain and clear, unblemished color. My Chip Carving sells its practice boards as clear grade northern basswood, suitable for carving on both sides.
Butternut and European lime: the other best chip carving woods
Butternut, at 490 lbf, is the usual second choice after basswood. Its grain shows more than basswood's. It can leave fuzzy surfaces, so the edge has to stay keen: strop the knife as soon as it starts to drag.
European lime, at 700 lbf, is the wood the Woodworkers Institute beginner course names next to basswood. It is the same genus as American basswood (Tilia) and clearly harder, so start it on a small grid.
Chip carving walnut, cherry and maple
These are maybe rows: even-grained hardwoods up to about 1,050 lbf. Black walnut, at 1,010 lbf, gives crisp cuts and a dark color, but its hardness figure is about two and a half times basswood's and it is a hard push for a knife when dry. Black cherry (950 lbf) and the soft maples (700 to 950 lbf) sit just below it. Hard maple, at 1,450 lbf, is above the limit and is a no for a hand-pushed knife.
On any of these, cut small. A chip from a 5 mm grid has twice the volume of one from a 4 mm grid, so keep hardwood patterns on the 4 mm practice sheets until the chips come out whole.
Note.Learn the cuts on basswood first. On a hard board a beginner cannot tell a dull knife from a wrong angle, because both leave the chip stuck.
Is pine, cedar or oak good for chip carving?
Eastern white pine and sugar pine, both 380 lbf, are a maybe: soft and even for pines, but only in clear boards, since knots and resin get in the way. Southern yellow pine (690 lbf) and most construction lumber are a no. Their hard resinous bands turn the edge aside, which is the subject of can you whittle pine.
Cedars are a no in the chart: they dent easily and carry a strong smell. Red oak and white oak are a no as well. At 1,220 to 1,360 lbf they are hard, with large open pores.
Chip carving wood thickness: 1/4 to 1/2 inch
Published practice boards run from 1/4 inch to about 1/2 inch (6 to 13 mm), and 3/8 inch is the size most often sold as chip carving practice stock. A thin board is enough because a chip drawn on a 4 mm grid is only a few millimeters deep. Go thicker when both faces will be carved.
| Source | Thickness | Board size |
|---|---|---|
| My Chip Carving practice boards | 3/8 in | 4, 5 or 6 in wide by 12 in long |
| Woodworkers Institute beginner course | 13 mm (about 1/2 in) | About 200 x 150 mm |
| Lora Irish supply list | 1/4 in | 3 to 4 in wide by 18 in long |
| READ N TRY | 1/4 in (6 mm) for one-sided carving | Thicker boards for carving both faces |
Chip carving blanks: where flat boards are sold
A chip carving blank is a flat, smooth, dry board. The surface has to be clean before the pattern goes on: the Woodworkers Institute course calls for a smooth, clean face, and Lora Irish sands with 320 grit first.
- Chip carving suppliers. Practice boards in clear basswood, cut to size. My Chip Carving offers its 5 and 6 inch boards with a practice pattern already applied.
- Craft plaques. Lora Irish's list mentions pre-finished basswood plaques of 11 x 14 and 14 x 14 inches for finished projects.
- Basswood boards and blocks online. Check that the listing gives the thickness and that the piece is a flat board, not a whittling block. Our basswood guide lists them by size.
- Project shapes. Patterns on My Chip Carving are drawn for trivets, plates, ornaments and holders, so basswood blanks in those shapes are what to look for after the practice boards.
Quick answers
Short answers to the searches behind this page. Hardness figures are Wood Database values for dry wood, and verdicts follow this site's chart rule.
- What is the best chip carving wood? Basswood, 410 lbf, with a fine, even texture. Butternut and European lime are the other two standard woods.
- How thick should chip carving wood be? 3/8 inch is the common practice size. Published boards run from 1/4 inch to about 1/2 inch (13 mm).
- Can you chip carve walnut? Yes, as a later step. Black walnut is 1,010 lbf, a hard push when dry, so keep the chips small and the knife stropped.
- Can you chip carve maple? Soft maples (700 to 950 lbf) are a maybe. Hard maple, at 1,450 lbf, is too hard for a hand-pushed chip carving knife.
- Where are chip carving blanks sold? Chip carving suppliers sell clear basswood practice boards. Lora Irish's supply list also points to craft plaques and hardware-store basswood boards.
Use this chart
Print it, save the image version, or put it on your own site or forum post with the code below. The code keeps a link back to this page as the source.
Embed code
<a href="https://carvingbench.com/blog/wood-for-chip-carving"><img src="https://carvingbench.com/charts/wood-for-chip-carving/image.png" alt="Best Wood for Chip Carving: Species, Board Thickness and Blanks" width="600" loading="lazy"></a> <p>Source: <a href="https://carvingbench.com/blog/wood-for-chip-carving">Best Wood for Chip Carving: Species, Board Thickness and Blanks</a>, Carving Bench</p>
What you need for this
- See price on AmazonAmazon
BeaverCraft BW19 Basswood Carving Blocks
From Best Basswood Carving Blocks: Sizes, Pack Counts and Price per Block
- See price on AmazonAmazon
Flexcut KN15 chip carving knife, 1 in blade
From Best Chip Carving Knives: Cutting Knife, Stab Knife and Starter Sets
- See price on AmazonAmazon
Bacher leather strop 12.6 in, 4 compounds and balm