Explainer

Can You Whittle Pine? White Pine, Yellow Pine and Store Lumber

Published

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Gear for this job

All 7 picks compared

"Pine" covers very different woods. The board or branch in your hand may be one of the easiest woods to whittle or one that fights the knife on every cut. Three things decide which: the group the pine belongs to, how sharply its growth rings switch between soft and hard wood, and how many knots the piece has. This page sorts pine into the kinds you are likely to meet, says what each is good for, and covers knots and resin. Hardness figures are Janka values for dry wood, in pounds-force (lbf). Lower cuts easier.

Pine types for whittling: hardness, resin and detail

Find your pine in the table. Hardness figures are the ones in our wood for carving chart, which follow the Wood Database. The verdicts follow the chart's stated rule. They are not test results.

Why white pine carves and yellow pine does not

A pine lays down soft, pale earlywood in spring and denser latewood later in the season. The Wood Database splits pines by how that change happens. The soft pines, which include eastern white pine and sugar pine, have low density, even grain and a gradual change from earlywood to latewood. A knife passes through the whole ring with about the same force.

The hard pines switch more abruptly. In the southern yellow pines the change is very abrupt and the grain very uneven. The edge sinks into a soft band, hits a hard resinous band and stops or skates sideways. That is why a pine that is only 690 lbf on paper can feel worse under a knife than a hardwood with a higher number. Western yellow pines such as ponderosa and lodgepole sit between the two groups: more even than southern yellow pine, less even than white pine.

Is store lumber or white wood good for whittling?

Usually not. Studs and common boards are sold for building, not carving. Some are stamped SPF, which stands for spruce-pine-fir: a lumber class that groups several spruces, pines and firs with similar strength. "Whitewood" is a store label too, not a species. So there is no single hardness figure for these boards, and they are not in our chart.

Hard pine lumber is one of the standard reasons a knife will not cut: see why whittling is so hard. If a board is all you have, read the end grain. Pale wood with faint rings and little contrast points to a soft pine. Wide dark bands with strong contrast point to a hard pine. Pick a board with no knots in the part you will carve.

Note.A board sold by name as eastern white pine or sugar pine, clear of knots, is a real carving wood. An unlabeled stud is a gamble.

How to deal with knots and resin on the blade

Knots are the bases of branches. The wood in a knot is harder than the wood around it, and the grain bends around it, so the knife has to change direction on every side. Lay out the carving so a knot falls in the waste, or saw it off before you start. For a first project, choose a piece with no knots at all.

All pines have resin canals. The Wood Database notes that the resin in longleaf pine can gum up tools and clog sandpaper, and that eastern white pine has the smallest canals of the soft pines. When the knife starts to drag on pine, look at the bevel before you blame the edge. Wipe resin off the blade with a rag, then strop the knife. A sticky bevel carries resin onto the strop.

Which projects suit pine?

Clear white pine suits bold shapes more than fine detail. Its medium texture is coarser than the fine texture of basswood, so small features such as eyes and fingers hold less crisply. Basswood remains the standard first wood for that reason.

  • Whittling: yes for eastern white pine and sugar pine. Simple animals, figures and other shapes from our whittling projects for beginners.
  • Relief carving: yes for the two white pines. Gouges on a clamped board cope well with soft, even pine.
  • Chip carving: maybe. White pine can be chip carved, but basswood and butternut are the standard boards.
  • Spoons: no. Pine is a resinous softwood, as the next section explains.

Can you carve spoons from pine?

For a spoon to eat or cook with, no. Pines carry resin and a resinous smell, and resinous softwoods are commonly advised against for utensils. Our chart marks every pine "no" for spoon carving. The usual spoon woods are closed-grain hardwoods such as birch, cherry, maple and walnut, carved green: see the best wood for spoon carving.

Pine is fine for practicing the cuts. A spoon shape in white pine teaches knife grips and how to follow the grain. Treat the result as practice or decoration.

What about a fresh pine branch?

A freshly cut branch is green wood, and green wood cuts far more easily than dry wood of the same species. A green pine branch is good for practicing push cuts, stop cuts and points. Expect sticky resin on the blade and on your hands.

A branch carved in the round still has the pith, the soft core, at its center, and wood dried with the pith in it is prone to cracking. Dry a finished piece slowly, away from heat and sun.

How to dry wood for carving →

Quick answers

Short answers to the searches behind this page, built from the rows of the wood chart and the Wood Database notes on pine.

  • Can you wood carve pine? Yes for eastern white pine and sugar pine, for whittling and relief carving. No for southern yellow pine.
  • Is pine good for spoon carving? No. Pines are resinous softwoods. Use a closed-grain hardwood such as birch or cherry for a spoon you will eat with.
  • Is pine good for chip carving? Maybe. The two soft white pines can be chip carved, but basswood is the standard board.
  • Is white wood good for whittling? It depends on the board. "Whitewood" is a store label for mixed species. A clear, soft, even-grained board can work.
  • Can you whittle any wood? No. Woods up to about 600 lbf whittle dry. Oak, ash, hickory and southern yellow pine are not knife woods.

What you need for this

Sources